1994-1997 Dodge Ram 2500 Dodge Ram 3500 Aluminum Radiator & AC Condenser Cooling Kit

1994-1997 Dodge Ram 2500 Dodge Ram 3500 Aluminum Radiator & AC Condenser Cooling Kit

The most important component of the cooling module is the radiator, which consists of the radiator core and plastic tanks with all requisite connections and fastening elements.

ECCPP Radiators feature the latest technology, materials, and construction and are meticulously designed using the most advanced simulation software and tooling development technology.

When you notice that your radiator is leaking, clogged, or otherwise damaged, you don't have to pay the high dealer price for a replacement anymore. Choose ECCPP radiators, you will get the same quality for much less.

Features

• 100% Leak Tested, Direct Replacement
• Suitable for securing hoses in plumbing and automotive applications
• Built with high-density multi-lowered fins for maximum cooling efficiency
• OE design to ensure exact fit, form, and function for an easy drop-in installation

AC Condenser Features

• Guaranteed Exact Fit for easy installation
• Each product is quality inspected and 100% tested
• Lightweight Direct Bolt-On OEM Fitment or Replacement, and Aluminum construction to ensure heat transfer efficiency
• Louvered aluminum fins and tubes are bonded through a unique furnace-brazing process with premium quality aluminum for maximum heat dissipation

Know about the AC Condenser

• AC Condenser: The condenser is part of the A/C system. It receives the hot, high-pressure gaseous refrigerant from the compressor and cools it to a warm liquid state, although still under high pressure.
• Check: If testing proves that your condenser is leaking, restricted, or otherwise damaged, don’t pay the high dealer price for a replacement, when you can get an OE quality condenser for much less from Replace.
• Location: The Condenser is located right in front of the radiator. High-pressure (hot) refrigerant travels through it and cools off as air passes through. Most late-model condensers cannot be flushed due to multiple flow paths and must be replaced if restricted.

1. How to clean the radiator

• Start the vehicle, to rise to normal temperature. Slowly open the tank cover, and the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, and flush the water tank, until out of clear water, suitable for any water cycle system.
• After cleaning, after waiting for pipeline rehabilitation add fluid to the water tank, and inject new coolant and water purification.

2. How to replace the radiator

• Disconnect the battery.
• Drain the radiator fluid into a suitable container.
• Remove the old radiator.
• Take off any plastic covers around the radiator.
• Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
• Disconnect the radiator hoses from the radiator.
• Disconnect the transmission cooling lines from the bottom of the radiator.
• Remove any clamps, brackets, or screws holding the radiator inside its frame.
• Lift the radiator up and out of the car.

3. How to install the new radiator

• Slide the new radiator into place.
• Connect any clamps or brackets that hold the radiator in place.
• Connect the transmission cooling lines carefully.
• Connect the engine cooling hoses to the radiator.
• Replace the fan and fan shroud.
• Reconnect the fan's electrical connection.
• Replace the plastic covers.
• Fill the radiator with fluid.
• Check your work to make sure that there are no leaks.
• (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

Note

Please keep children and pets away when replacing the radiator.

1. In project operation, the vehicle's normal temperature is 60 to 80 degrees.

2. Add detergent if the tank is too full and you can take some antifreeze.

Includes

1pc of brand new radiator&1pc of brand new ac condenser