2013-2017 Honda Accord A/C Condenser Cooling Fan Assembly 3.5L

The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating.

ECCPP, one of the largest automotive aftermarket parts suppliers online in America, our mission is that brings high-quality automotive accessories to every corner of the world. We aim to provide each customer with the best quality auto parts at the best purchasing. Our high-quality products and professional services are looking forward to becoming the preferred choice for your reliable brand.

ECCPP fan keeps your engine cool. Also allow quicker warm-ups and cool-downs, longer water pump life, less fan noise, improved air conditioner performance and improve gas mileage.

Features

• Direct replacement for your factory part
• OE quality for a low price
• Heavy-duty construction to last
• Installation is identical to the factory unit

Note

The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

Step 1: Locate the Radiator Cooling Fan

Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

Step 2: Disconnect the Power Supply

On the fan motor is an electric cable running toward the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

Step 3: Remove the Fan Housing

Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well. A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

Step 4: Remove the Radiator Cooling Fan and the Fan Motor

The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide it off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

Step 5: Attach the Replacement Radiator Cooling Fan and Fan Motor

Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper, and secure the new cooling fan and keeper into place. Return the fan housing back to its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor to the car's electrical system using the electrical tape guide you made in step 6. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.

Information About AC Condenser

1. Such condensers typically also use a fan to force air through the heat sink and away from the tropics. Refrigeration principle of the general refrigerator The function of the compressor is to compress the steam with lower pressure into steam with higher pressure so that the volume of the steam is reduced and the pressure is increased.

2. The compressor draws in the lower-pressure working fluid vapor from the evaporator, causes the pressure to rise, and then sends it to the condenser, which is condensed into a higher-pressure liquid in the condenser, and is throttled after the throttling valve becomes a pressure. After the low liquid is sent to the evaporator, it absorbs heat in the evaporator and evaporates to become a lower-pressure steam, thereby completing the refrigeration cycle.

Functions:

Engine cooling requires a constant supply of fresh air, The radiator cooling fan draws air past the fins of the radiator core to lower the coolant temperature that will circulate through the engine, and our cooling fans are powered electronically, It receives a signal from a coolant temperature sensor when the engine is running too hot, and it turns the cooling fan assembly on.

Positions:

1. water pump 2. airflow 3. upper radiator hose 4. thermostat 5. heater core 6. radiator cap

Effects:

1. High-quality wire core and plastic fan shroud 2. Fast delivery, Quick response, Most customers highly recommend 3. ECCPP fan keeps your engine cool. Also allow quicker warm-ups and cool-downs, longer water pump life, less fan noise, improved air conditioner performance and improve gas mileage.