Dual Radiator Fan For 06-13 Audi A3 05-15 Volkswagen Jetta

The cooling fan is an important part of the car cooling system. It not only affects the cooling effect of the engine but also affects the performance and service life of the engine.

ECCPP cooling fan products meet cooling requirements with the lowest power consumption, and their superior quality and reliability will help your vehicle's braking system to maintain normal and safe operation.

If you also need a cooling fan that saves energy and improves fuel economy, ECCPP will be happy to provide services for you. In addition to radiator cooling fans, we also have some related accessories, such as control modules, radiator cooling fan clutches, etc., which are also available for your reference.

Features

• Easy to install and meet OEM standards
• Excellent customer service and on-time delivery
• High standards of quality control, in line with cooling requirements
• Each radiator and condenser fan assembly is accelerated tested to ensure durability

Installation

Step 1: Locate the Radiator Cooling Fan

Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

Step 2: Disconnect the Power Supply

On the fan motor is an electric cable running toward the engine. Find the connector of the wires from your engine and your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

Step 3: Remove the Fan Housing

Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well. A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

Step 4: Remove the Radiator Cooling Fan and the Fan Motor

The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide it off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

Step 5: Attach the Replacement Radiator Cooling Fan and Fan Motor

Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper, and secure the new cooling fan and keeper into place. Return the fan housing to its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor to the car's electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.

Note

Please check the compatibility before buying from us.

Includes

Package Includes: 1X Cooling Fan