In addition to improving the appearance of the car, the splitter also helps to improve the aerodynamic characteristics of the car. Let's take a closer look at car splitters and see what they are and how they work.

What is a Car Splitter?

The car splitter is a rigid extension that is added to the bottom of the front bumper as a modification to the body. It looks like a flat spoon extending forward. It is usually made of carbon fiber or other durable materials. The splitter sometimes has a support rod connected between the splitter and the bumper. They strengthened the shunt and kept it at a speed parallel to the ground.

Rods are not required, but they are definitely expected-especially if you are participating in a competition. They help assist the separator by moving the separator down and helping to level it. This will bend when moving or breaking without a rod. The separator tightens the entire area from the front of the car and stops near the front wheels. This provides a nice low pressure area under the car, but only at speeds higher than about 120 km/h.

How Do Car Splitters Work?

The splitter reduces lift and increases traction by "splitting" the air, thereby improving the performance of the car.

When the car reaches a high speed, the air pressure at the front of the car will increase. The pressure of the air under the car is relatively high. The pressure of the air passing through the top of the car is relatively low. This will cause the front of the car to lift very slightly and result in reduced road traction.

For diffusers, the front of the vehicle is the best place to discharge air. The splitter is usually used to increase the downforce at the front of the vehicle. The airflow is blocked by the air barrier, creating a high-pressure environment. Rubber, steel, aluminum and other composite materials usually constitute the car splitter. On the other hand, the lip kit is made of high-quality and durable rubber. The separator creates a gap of two different speeds between the moving air. When a wide splitter is placed on the top of a car, the ventilation moving under the vehicle will be much faster because the splitter effectively "sculpts" the air and pushes a small amount of air under the car. When a car is driving at a high speed, air pressure is generated on the front side of the car. The air under the vehicle is quite high.

Many drivers use the diverter in combination with the front air dam. Some air dams have openings to introduce air into ducts to cool the brakes. Generally speaking, body upgrades are to redirect the air to improve performance.

Where to buy car splitter & rods

ECCPP front bumper fork tie support rod is a kind of exquisite car decoration parts, novel design and perfect decoration effect. It not only improves the exquisiteness of the body components but also prevents the components from falling off abnormally. After installation, it can enhance the firmness between the surrounding and the body and can be separated from the simple decorative effect to become a practical car decoration accessory.

This exquisite and compact lever is mainly fixed on the body components (front and rear surround, skirt, head and tail lip), and can also be installed in the car center console or interior trim panel. It not only improves the exquisiteness of the body components but also prevents the components from falling off abnormally. The installation in the car can play a special decorative role, creating a certain metal texture and luxurious temperament for the interior of the car.

These support rods are used to reinforce your front splitter or rear diffuser. Splitter. Comes with a pair of stainless steel support rods. These include fully articulated top and bottom joints which allow them to be installed at any angle. It will support your vehicle bumper lip splitter stronger with and awesome eye-catching look. The threaded center section on each rod allows up to 3 inches overall adjustment without removing either end from your body panels. The product will require drilling holes into the bumper and/or lip/diffuser to attach safely to the vehicle.